Absorption-compression heat pump
An absorption-compression heat pump (ACHP) is a device that integrate an electric compressor in an absorption heat pump. In some cases this is obtained by combining a vapor-compression heat pump and an absorption heat pump. It is also referred to as a hybrid heat pump[1] which is however a broader field. Thanks to this integration, the device can obtain cooling and heating effects using both thermal and electrical energy sources.[2][3] This type of systems is well coupled with cogeneration systems where both heat and electricity are produced. Depending on the configuration, the system can maximize heating and cooling production from a given amount of fuel, or can improve the temperature (hence the quality) of waste heat from other processes.[4] This second use is the most studied one and has been applied to several industrial applications.[5]
History
- 1748
- The first absorption-compression heat pump cycle concept was patented by Osenbrück.[5] Little research on it was done in the following years.
- 1950-1951
- Altenkirch performed a detailed theoretical study identifying the cycle as having a significant energy saving potential.[6]
- 1970-2000
- With the oil crisis in the 70s, the energy saving potential of the cycle grew in interest and there was a rapid increase in research activities in the field.[5] In this period several experimental plants were built and in 1997, Groll summarized this activities in its review where he identified more than 40 studies.[7] At that time, considerable work was still needed before the ACHP could become commercially available.
- 2011
- Nordtvedt studied the cycle in his doctoral thesis and his studies ended up in the construction, in 2011, of the first commercial application in the Norwegian Food Industry.[8] After this, several units have been installed for commercial use in various high temperature industrial applications.[5]
Advantages and drawbacks
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2a/P-T_Diagram_of_the_Pseudo-isobaric_temperature_gliding_binary_heat_pump.png/440px-P-T_Diagram_of_the_Pseudo-isobaric_temperature_gliding_binary_heat_pump.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/58/GHS-pictogram-skull.svg/110px-GHS-pictogram-skull.svg.png)
The main advantage with respect to compression heat pump is that the compression-absorption heat pumps allow the heat to be transfer with a temperature glide. The compression heat pump uses a single pure working fluid, hence exchanges heat at a constant temperature. The absorption-compression heat pump uses instead a binary mixture where the condensation and evaporation occur with a temperature glide. This property increases the efficiency of the heat transfer when the heat source also has a significant temperature glide, which is the typical condition found when dealing with waste heat recovery.[4]
Being a hybrid solution that can exploit both heat and mechanical/electric energy sources, the device can be perfectly coupled with cogeneration units to produce heating and cooling at very high efficiencies.[9] Moreover, it makes the system more flexible, allowing the optimization of the mix of electricity and thermal energy. Their availability vary in fact along the day and the year. Therefore the flexibility allow to reduce the operating costs.[9]
The main drawback of this technology is that, to achieve good performances, they typically need to employ ammonia, which is very toxic and flammable. This drawback resulted in the fact that these applications remained limited to the industrial sector, where it is more practical dealing with dangerous fluids.[3]
Configurations
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0d/Compression-Absorption_Heat_Transformer_Mech-Powered_Osenbr%C3%BCck_Cycle.png/400px-Compression-Absorption_Heat_Transformer_Mech-Powered_Osenbr%C3%BCck_Cycle.png)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/41/Scheme_of_combined_absorption_and_vapor-compression_refrigeration_system.png/400px-Scheme_of_combined_absorption_and_vapor-compression_refrigeration_system.png)
The most studied configuration is the so-called compression heat pump with solution cycle (CHPS) or compression resorption heat pump (CRHP),[10] where the compressor is in parallel to the electric pump located between the absorber and the desorber.[4] This configuration is used to increase the temperature of waste heat since it allow high absorption temperature at lower pressure than compression heat pumps.[11]
Another possible configuration for the absorption compression heat pump is obtained from the combination of a gas-driven absorption heat pump (GAHP) with a vapor-compression heat pump. This configuration arises from the consideration that both cycles have in common a condenser, a lamination valve, and an evaporator. The main difference between the two is in the compression phase: where the compression heat pump uses an electric compressor, the gas-driven absorption heat pump uses a thermal compressor.[12] The ACHP is obtained by combining the components that are in common and using the electric and thermal compressor in parallel or in series.[3]
Fluids selection
Compression heat pumps use only a single fluid which is a refrigerant. In contrast, absorption heat pump requires two fluids, a refrigerant and an absorbent able to absorb it. By combining the two devices, proper refrigerant absorbent pairs compatible with both the cycles are needed.
Refrigerants
There is a wide choice of refrigerants available for compression heat pumps. The absorption cycle is the one limiting the choice of the refrigerant. The most common refrigerants for absorption systems are ammonia and water.[13] Both are good for combined absorption-compression heat pumps.[14][15]
Ammonia has an exceptionally good solubility in water. This is an important aspect that increases the performance and decreases the size of the device. However, its high toxicity and flammability reduces its attractiveness.[3]
Water is a very attractive refrigerant because it is abundant, non-toxic, non-flammable and highly soluble in lithium bromide (LiBr). The main issue with water is that, at the typical heat pump evaporator pressures, it freezes at 0°C. This makes water unsuitable for the applications where the cold sink goes below 0°C, which is the typical winter operating condition of an air source heat pump.[16]
Absorbents
The absorbent and refrigerant are strictly related to each other. In the case that ammonia is used as refrigerant, the most common absorbent is water. In the case that water is used as refrigerant, as previously mentioned, the absorbent is usually LiBr.
Ionic liquids have also been proposed as good absorbents, specially for water as refrigerant.[3] The main advantages of these salts is that they can be used under the conditions at which LiBr solution runs the risk of crystallization and they are less corrosive.[17]
See also
References
- ^ Hultén, Magnus; Berntsson, Thore (1999). "The compression/absorption cycle – influence of some major parameters on COP and a comparison with the compression cycle". International Journal of Refrigeration. 22 (2): 91–106. doi:10.1016/s0140-7007(98)00047-4. ISSN 0140-7007.
- ^ Swinney, J; Jones, W.E; Wilson, J.A (2001). "A novel hybrid absorption–compression refrigeration cycle". International Journal of Refrigeration. 24 (3): 208–219. doi:10.1016/s0140-7007(00)00025-6. ISSN 0140-7007.
- ^ a b c d e WO2006124776A2, Shiflett, Mark Brandon & Yokozeki, Akimichi, "Hybrid vapor compression-absorption cycle", issued 2006-11-23
- ^ a b c B, Wersland M.; H, Kvalsvik K.; M, Bantle (2017). "Off-design of high temperature compression-absorption heat pump". 7th Conference on Ammonia and CO2 Refrigeration Technology. Proceedings: Ohrid, North Macedonia, May 11-13, 2017. doi:10.18462/iir.nh3-co2.2017.0040.
- ^ a b c d Ahrens, Marcel Ulrich; Loth, Maximilian; Tolstorebrov, Ignat; Hafner, Armin; Kabelac, Stephan; Wang, Ruzhu; Eikevik, Trygve Magne (2021-05-19). "Identification of Existing Challenges and Future Trends for the Utilization of Ammonia-Water Absorption–Compression Heat Pumps at High Temperature Operation". Applied Sciences. 11 (10): 4635. doi:10.3390/app11104635. hdl:11250/2756158. ISSN 2076-3417.
- ^ Mestra Rodríguez, Álvaro Miguel; Valles, Manel; Bourouis, Mahmoud; Coronas, Alberto (2003). "Absorption/compression heat pump with organic fluid mixtures for industrial heat recovery. Cycle performance and first experimental results". Proceedings Eurotherm Seminar 72: 397–402. ISBN 978-84-931209-8-6.
- ^ "Current status of absorption/compression cycle... | 1997". iifiir.org. Retrieved 2024-07-11.
- ^ Nordtvedt, Stein Rune; Horntvedt, Bjarne R.; Eikefjord, Jan; Johansen, John (2013). "Hybrid heat pump for waste heat recovery in Norwegian food industry". Thermally Driven Heat Pumps for Heating and Cooling. doi:10.14279/depositonce-4859.
- ^ a b Russo, Andrea; Cannelli, Michele; Rosselli, Carlo; Sasso, Maurizio (2015). "Thermodynamic Analysis Of Compression/Absorption Refrigeration System". ASME-ATI-UIT 2015 Conference on Thermal Energy Systems: Production, Storage, Utilization and the Environment.
- ^ "Compression Heat Pump with Solution Cycle and the Refrigerant Mixture Ammonia-Water – Institute of Thermodynamics – Leibniz University Hannover". Leibniz Universität Hannover. Retrieved 2024-07-10.
- ^ B.V, De Kleijn Energy Consulting. "Hybrid heat pump". Industrialheatpumps.nl (in Dutch). Retrieved 2024-07-10.
- ^ Kühn, Annett (2013-10-23). Thermally driven heat pumps for heating and cooling. Universitätsverlag der TU Berlin. p. 21. ISBN 978-3-7983-2596-8.
- ^ (:Unkn) Unknown (2013-10-23). Thermally driven heat pumps for heating and cooling. p. 19. doi:10.14279/depositonce-3726. ISBN 978-3-7983-2596-8.
- ^ AHLBY, L.; HODGETT, D.L. (1990), "Compression-Absorption Heat Pumps", Heat Pumps, Elsevier, pp. 21–34, doi:10.1016/b978-0-08-040193-5.50017-1, ISBN 978-0-08-040193-5, retrieved 2024-07-09
- ^ Sun, Jian; Wang, Yinwu; Wu, Kexin; Ge, Zhihua; Yang, Yongping (2022). "Analysis of a New Super High Temperature Hybrid Absorption-Compression Heat Pump Cycle". Energies. 15 (20): 7515. doi:10.3390/en15207515. ISSN 1996-1073.
- ^ Alabd Mohamed, Salem; Nawab Karimi, Munawar (2019-11-01). "Simulation of Lithium Bromide- Water (LiBr-H2O) Vapor Absorption System (VAS) powered by Solar Flat Plate Collector (SFPC)". IOP Conference Series: Materials Science and Engineering. 691 (1): 012031. Bibcode:2019MS&E..691a2031A. doi:10.1088/1757-899X/691/1/012031. ISSN 1757-8981.
- ^ Kühn, Annett (2013-10-23). Thermally driven heat pumps for heating and cooling. Universitätsverlag der TU Berlin. p. 215. ISBN 978-3-7983-2596-8.
External links
- "Hybrid heat pump - Operating principle". IndustrialHeatPumps.nl. Retrieved 10 July 2024.
- "Compression Heat Pump with Solution Cycle and the Refrigerant Mixture Ammonia-Water". Institute of Thermodynamics - Leibniz University Hannover. Retrieved 10 July 2024.
- "Osenbrück 4.0 - Heat Pump Cycle - Hybrid absorption-compression heat pump with ammonia-water mixture as natural working fluid" (PDF). Sintef. Retrieved 11 July 2024.
- v
- t
- e
concepts
- Air changes per hour
- Bake-out
- Building envelope
- Convection
- Dilution
- Domestic energy consumption
- Enthalpy
- Fluid dynamics
- Gas compressor
- Heat pump and refrigeration cycle
- Heat transfer
- Humidity
- Infiltration
- Latent heat
- Noise control
- Outgassing
- Particulates
- Psychrometrics
- Sensible heat
- Stack effect
- Thermal comfort
- Thermal destratification
- Thermal mass
- Thermodynamics
- Vapour pressure of water
- Absorption-compression heat pump
- Absorption refrigerator
- Air barrier
- Air conditioning
- Antifreeze
- Automobile air conditioning
- Autonomous building
- Building insulation materials
- Central heating
- Central solar heating
- Chilled beam
- Chilled water
- Constant air volume (CAV)
- Coolant
- Cross ventilation
- Dedicated outdoor air system (DOAS)
- Deep water source cooling
- Demand controlled ventilation (DCV)
- Displacement ventilation
- District cooling
- District heating
- Electric heating
- Energy recovery ventilation (ERV)
- Firestop
- Forced-air
- Forced-air gas
- Free cooling
- Heat recovery ventilation (HRV)
- Hybrid heat
- Hydronics
- Ice storage air conditioning
- Kitchen ventilation
- Mixed-mode ventilation
- Microgeneration
- Passive cooling
- Passive daytime radiative cooling
- Passive house
- Passive ventilation
- Radiant heating and cooling
- Radiant cooling
- Radiant heating
- Radon mitigation
- Refrigeration
- Renewable heat
- Room air distribution
- Solar air heat
- Solar combisystem
- Solar cooling
- Solar heating
- Thermal insulation
- Thermosiphon
- Underfloor air distribution
- Underfloor heating
- Vapor barrier
- Vapor-compression refrigeration (VCRS)
- Variable air volume (VAV)
- Variable refrigerant flow (VRF)
- Ventilation
- Water heat recycling
- Air conditioner inverter
- Air door
- Air filter
- Air handler
- Air ionizer
- Air-mixing plenum
- Air purifier
- Air source heat pump
- Attic fan
- Automatic balancing valve
- Back boiler
- Barrier pipe
- Blast damper
- Boiler
- Centrifugal fan
- Ceramic heater
- Chiller
- Condensate pump
- Condenser
- Condensing boiler
- Convection heater
- Compressor
- Cooling tower
- Damper
- Dehumidifier
- Duct
- Economizer
- Electrostatic precipitator
- Evaporative cooler
- Evaporator
- Exhaust hood
- Expansion tank
- Fan
- Fan coil unit
- Fan filter unit
- Fan heater
- Fire damper
- Fireplace
- Fireplace insert
- Freeze stat
- Flue
- Freon
- Fume hood
- Furnace
- Gas compressor
- Gas heater
- Gasoline heater
- Grease duct
- Grille
- Ground-coupled heat exchanger
- Ground source heat pump
- Heat exchanger
- Heat pipe
- Heat pump
- Heating film
- Heating system
- HEPA
- High efficiency glandless circulating pump
- High-pressure cut-off switch
- Humidifier
- Infrared heater
- Inverter compressor
- Kerosene heater
- Louver
- Mechanical room
- Oil heater
- Packaged terminal air conditioner
- Plenum space
- Pressurisation ductwork
- Process duct work
- Radiator
- Radiator reflector
- Recuperator
- Refrigerant
- Register
- Reversing valve
- Run-around coil
- Sail switch
- Scroll compressor
- Solar chimney
- Solar-assisted heat pump
- Space heater
- Smoke canopy
- Smoke damper
- Smoke exhaust ductwork
- Thermal expansion valve
- Thermal wheel
- Thermostatic radiator valve
- Trickle vent
- Trombe wall
- TurboSwing
- Turning vanes
- Ultra-low particulate air (ULPA)
- Whole-house fan
- Windcatcher
- Wood-burning stove
- Zone valve
and control
- Air flow meter
- Aquastat
- BACnet
- Blower door
- Building automation
- Carbon dioxide sensor
- Clean air delivery rate (CADR)
- Control valve
- Gas detector
- Home energy monitor
- Humidistat
- HVAC control system
- Infrared thermometer
- Intelligent buildings
- LonWorks
- Minimum efficiency reporting value (MERV)
- Normal temperature and pressure (NTP)
- OpenTherm
- Programmable communicating thermostat
- Programmable thermostat
- Psychrometrics
- Room temperature
- Smart thermostat
- Standard temperature and pressure (STP)
- Thermographic camera
- Thermostat
- Thermostatic radiator valve
trades,
and services
- Architectural acoustics
- Architectural engineering
- Architectural technologist
- Building services engineering
- Building information modeling (BIM)
- Deep energy retrofit
- Duct cleaning
- Duct leakage testing
- Environmental engineering
- Hydronic balancing
- Kitchen exhaust cleaning
- Mechanical engineering
- Mechanical, electrical, and plumbing
- Mold growth, assessment, and remediation
- Refrigerant reclamation
- Testing, adjusting, balancing
organizations
- Indoor air quality (IAQ)
- Passive smoking
- Sick building syndrome (SBS)
- Volatile organic compound (VOC)
- ASHRAE Handbook
- Building science
- Fireproofing
- Glossary of HVAC terms
- Warm Spaces
- World Refrigeration Day
- Template:Home automation
- Template:Solar energy