Liberty Wind Turbine
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/89/Dutch_Hill_Cohocton_Wind_Farm_2802139997.jpg/250px-Dutch_Hill_Cohocton_Wind_Farm_2802139997.jpg)
The 2.5 MW Liberty Wind Turbine was the largest wind turbine manufactured in the United States when it was first installed in 2007.[1] It was developed through a partnership with U.S. Department of Energy and its National Renewable Energy Laboratory for Clipper Windpower.[1]
History
The design of the turbine was meant to reduce problems with power train components that have been experienced in other machines.[2][3] A two-ton crane within the nacelle simplifies maintenance thereby reducing costs. The size and weight of the Liberty allow it to be constructed with crane of the same capacity as used with most 1.5 MW turbines.[1]
Commercial sales for the new Liberty turbine started in June 2006.[1] Liberty turbines were placed into service in the first quarter of 2007 at Steel Winds, a wind energy project located on the coast of Lake Erie in Lackawanna, New York, south of the City of Buffalo in Erie County.[4] Sales stopped in 2012 as the model was experiencing problems with power train components that had cost the company hundreds of millions of dollars in warranty repairs.[5]
Technical characteristics
Liberty Wind Turbine uses an 80 meter tall tower as a standard in its design. The rotor diameter varies amongst particular versions of turbines. The diameter for version C89 is 89 meters, 93 meters for version C93, 96 meters for version C96, and 99 meters for C99. Blade lengths are 43.2m for C89, 45.2m for C93, 46.7m for C96 and 48.2m for C100. Liberty Wind Turbines use 4 generators that have permanent magnets. Each generator delivers 660 kW at 1133 RPM at a voltage of 1350 Vdc. [citation needed]
References
- ^ a b c d Selko, Adrienne (September 11, 2007). "Largest Wind Turbine Manufactured in U.S. Gets Energy Award". IndustryWeek. Retrieved December 12, 2021.
- ^ Goudarzi, Navid; Dong Zhu, Wei (April 2013), Basu, Biswajit (ed.), "Offshore and Onshore Wind Energy Conversion: The Potential of a Novel Multiple-Generator Drivetrain", Key Engineering Materials, 569: 644–651, doi:10.4028/www.scientific.net/KEM.569-570.644, S2CID 110292956
- ^ Goudarzi, Navid (June 2013), "A Review on the Development of the Wind Turbine Generators across the World", International Journal of Dynamics and Control, 1 (2): 192–202, doi:10.1007/s40435-013-0016-y
- ^ Robb, Drew (December 1, 2008). "The return of the Clipper Liberty wind turbine". powermag.com. Retrieved December 12, 2021.
- ^ "Customer seeking to freeze Clipper Windpower assets, including Cedar Rapids factory". The Gazette (Cedar Rapids, Iowa). November 5, 2012. Archived from the original on November 5, 2012. Retrieved December 12, 2021.
External links
- Cutaway diagram of Liberty wind turbine
- v
- t
- e
- Airborne wind energy
- By country
- History
- Land vehicles
- Offshore
- Turbines
- Windmill
- 2020s in wind power research
- Betz's law
- Blade element momentum theory
- Capacity factor
- Energy return on investment
- Energy storage
- Energy subsidy
- HVDC
- Hybrid power
- Laddermill
- Net energy gain
- Tip-speed ratio
- Variable renewable energy
- Virtual power plant
- Wind power forecasting
- Wind profile power law
- Wind resource assessment
Wind power portal
Category
Commons
Additional portals:
- Renewable energy
- Energy