Weber number
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f8/Splash_%28fluid_mechanics%29.jpg/250px-Splash_%28fluid_mechanics%29.jpg)
The Weber number (We) is a dimensionless number in fluid mechanics that is often useful in analysing fluid flows where there is an interface between two different fluids, especially for multiphase flows with strongly curved surfaces.[1] It is named after Moritz Weber (1871–1951).[2] It can be thought of as a measure of the relative importance of the fluid's inertia compared to its surface tension. The quantity is useful in analyzing thin film flows and the formation of droplets and bubbles.
Mathematical expression
The Weber number may be written as:
where
- is the drag coefficient of the body cross-section.
- is the density of the fluid (kg/m3).
- is its velocity (m/s).
- is its characteristic length, typically the droplet diameter (m).
- is the surface tension (N/m).
The modified Weber number,
equals the ratio of the kinetic energy on impact to the surface energy,
- ,
where
and
- .
Appearance in the Navier-Stokes equations
The Weber number appears in the incompressible Navier-Stokes equations through a free surface boundary condition.[3]
For a fluid of constant density and dynamic viscosity , at the free surface interface there is a balance between the normal stress and the curvature force associated with the surface tension:
Where is the unit normal vector to the surface, is the Cauchy stress tensor, and is the divergence operator. The Cauchy stress tensor for an incompressible fluid takes the form:
Introducing the dynamic pressure and, assuming high Reynolds number flow, it is possible to nondimensionalize the variables with the scalings:
The free surface boundary condition in nondimensionalized variables is then:
Where is the Froude number, is the Reynolds number, and is the Weber number. The influence of the Weber number can then be quantified relative to gravitational and viscous forces.
Applications
One application of the Weber number is the study of heat pipes. When the momentum flux in the vapor core of the heat pipe is high, there is a possibility that the shear stress exerted on the liquid in the wick can be large enough to entrain droplets into the vapor flow. The Weber number is the dimensionless parameter that determines the onset of this phenomenon called the entrainment limit (Weber number greater than or equal to 1). In this case the Weber number is defined as the ratio of the momentum in the vapor layer divided by the surface tension force restraining the liquid, where the characteristic length is the surface pore size.
References
- ^ Arnold Frohn; Norbert Roth (27 March 2000). Dynamics of Droplets. Springer Science & Business Media. pp. 15–. ISBN 978-3-540-65887-0.
- ^ Philip Day; Andreas Manz; Yonghao Zhang (28 July 2012). Microdroplet Technology: Principles and Emerging Applications in Biology and Chemistry. Springer Science & Business Media. pp. 9–. ISBN 978-1-4614-3265-4.
- ^ Bush, John W.M. "Surface Tension Module" (PDF). Department of Mathematics, MIT.
Further reading
- Weast, R. Lide, D. Astle, M. Beyer, W. (1989-1990). CRC Handbook of Chemistry and Physics. 70th ed. Boca Raton, Florida: CRC Press, Inc.. F-373,376.
- v
- t
- e
- Archimedes
- Atwood
- Bagnold
- Bejan
- Biot
- Bond
- Brinkman
- Capillary
- Cauchy
- Chandrasekhar
- Damköhler
- Darcy
- Dean
- Deborah
- Dukhin
- Eckert
- Ekman
- Eötvös
- Euler
- Froude
- Galilei
- Graetz
- Grashof
- Görtler
- Hagen
- Iribarren
- Kapitza
- Keulegan–Carpenter
- Knudsen
- Laplace
- Lewis
- Mach
- Marangoni
- Morton
- Nusselt
- Ohnesorge
- Péclet
- Prandtl
- Rayleigh
- Reynolds
- Richardson
- Roshko
- Rossby
- Rouse
- Schmidt
- Scruton
- Sherwood
- Shields
- Stanton
- Stokes
- Strouhal
- Stuart
- Suratman
- Taylor
- Ursell
- Weber
- Weissenberg
- Womersley